Satel INTEGRA Plus Uživatelský manuál stáhnout pdf (Strana 8)

6 User Manual SATEL

4.3 Operation under duress

When acting under duress, the DURESS type code must be used instead of the normal user

code (see section USER TYPES p. 26).

5. Operating the alarm system by means of LCD keypad

SATEL offers the following keypads for INTEGRA Plus control panels:

INT-TSG – touchscreen keypad;

INT-KSG – LCD keypad with touch keys;

INT-KLCD – LCD keypad with mechanical keys;

INT-KLCDR – LCD keypad with mechanical keys and built-in proximity card reader;

INT-KLCDK – LCD keypad with mechanical keys;

INT-KLCDL – LCD keypad with mechanical keys;

INT-KLCDS – LCD keypad with mechanical keys.

The keypads are available in a variety of color options for the enclosure, display and key

backlight. The color variant is indicated by the additional designation in the keypad name

(e.g. INT-KLCD-GR – green display and key backlight; INT-KLCD-BL – blue display and key

backlight).

5.1 Keypads description

The INT-TSG and INT-KSG keypads are described in a separate manuals, which are

delivered with these keypads.

5.1.1 LCD display

The display facilitates communication between the user and the alarm system, clearly

indicating the system status. The functions available to the user are presented on the display.

The display backlight can be used, if needed.

In standby mode, the display shows:

– in the upper line – the date and time in the format defined by the installer,

– in the lower line – the keypad name or state (status) of selected partitions (to be defined

by the installer).

The installer can configure the keypad so that when you press the 9 key for approx. 3

seconds, the display will enter the partition state presentation mode. The status of

partitions operated by the keypad (including those from which alarm is signaled on the

keypad) is presented by means of symbols. The display will return to the standby mode after

you press the 9 key for approx. 3 seconds again.

If some predefined events occur, additional messages may appear on the display (e.g.

arming, disarming, auto-arm delay countdown, entry/exit delay countdown, alarm, etc.).

Entering the user code, i.e. the user authorization, will open a menu containing the functions

that are available to the user. The functions are presented in two lines. The currently selected

function is indicated by the arrow on the left-hand side. How the function related information

is presented depends on the specific character of the given function.

The way of display backlighting is programmed by the installer.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Žádné komentáře

Satel INTEGRA Plus Uživatelský manuál Strana 8