Satel INTEGRA Plus Uživatelský manuál stáhnout pdf (Strana 37)

SATEL INTEGRA Plus 35

5.14.2 Controlling the BI SWITCH type of output

Pressing the or  key will change over the output status. Additionally, when the output is

active, pressing any digit key will turn the output off.

5.14.3 Controlling the REMOTE SWITCH type of outputs

Depending on how the output has been programmed, pressing the or  key will activate

the output for the time programmed by the installer or change over the output status.

Additionally, when the output is active, pressing any digit key will turn the output off.

5.14.4 Controlling the roller shutter outputs

The SHUTTER UP and SHUTTER DOWN type of outputs are always programmed as consecutive

and in pairs. Displayed on the list of outputs is only the name of output programmed as

SHUTTER UP. The status of outputs is presented by means of symbols:

- outputs inactive (off),

- SHUTTER UP output active (on),

- SHUTTER DOWN output active (on).

Pressing the or  key will display the cursor in the form of a horizontal line under the

output status symbol. Pressing the  key will turn on the SHUTTER UP type output (if both

outputs are inactive) or turn off the SHUTTER DOWN type output (if it is active). Pressing the 

key will turn on the SHUTTER DOWN type output (if both outputs are inactive) or turn off the

SHUTTER UP type output (if it is active). Irrespective of which output is currently active,

pressing any digit key will turn the output off. When the control is finished, press the or 

key to return to the list of outputs which can be controlled (the cursor under the symbol will

disappear).

6. Using the partition keypad

INT-S INT-SK INT-SCR

Fig. 4. Partition keypads (INT-S and INT-SK keypads are shown without flaps).

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Žádné komentáře

Satel INTEGRA Plus Uživatelský manuál Strana 37