Satel INTEGRA Plus Uživatelský manuál Strana 19

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 48
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 18
SATEL INTEGRA Plus 17
Disarm – allows to disarm the partitions accessible to the user from the given keypad.
Clear alarm – allows to silence the alarm.
Clear other alarms – allows to silence the alarms from other objects, to which the user has
normally no access.
Abort voice messaging – terminates the telephone messaging.
The messaging can be cancelled automatically together with alarm clearing. The
messaging cancellation rules are defined by the installer.
Arm – allows to arm the partitions accessible to the user from the given keypad.
Arm (2 codes) – allows to initiate arming of the partitions which require entering 2 codes.
Disarm (2codes) – allows to initiate disarming of the partitions which require entering 2
codes.
Defer auto-arming – available when auto-arming delay countdown is running. It allows to
postpone by a programmed time period the auto-arming of the partition in which the auto-
arming delay countdown is running. Entering just zeros will block the auto-arming function
(until the next auto-arming time).
Set auto-arming delay – available when the auto-arming delay is programmed for at least
one partition and the auto-arming delay countdown is not currently running in that partition.
It allows to postpone by a programmed time period the auto-arming of the partition.
Arming mode – allows to select the arming mode which is to be used (the shortcut key is
shown in square brackets):
[0] full arming (to be used after everybody has left the protected area);
[1] full arming + bypasses (allows the users to stay in the protected area) – the zones for
which the BYPASSED IF NO EXIT option is enabled by the installer will be bypassed;
[2] arming without interior (allows the users to stay in the protected area):
interior zones (3. INTERIOR DELAYED zone type) will be disarmed;
violating the exterior zone (8. EXTERIOR zone type) will trigger a silent alarm;
violating another alarm zone will trigger a loud alarm.
[3] arming without interior and without entry delay (allows the users to stay in the
protected area – to be used when nobody else is to enter the protected area) – this
arming mode is similar to the previous one, but the delayed zones operate as the
instant ones (no entry delay).
Cancel 1st code – if the partition is armed/disarmed by means of two codes and the first
code has already been entered, the user can still cancel the consent to arming/disarming.
Change own code – allows the user to change his/her own code.
Change telephone code – allows the user to change his/her own telephone code.
Change prefix – available to the administrator, if the use of prefixes in the system has been
made available by the installer (the prefix length has been defined). It enables to program
the prefixes and the time to remind about the need to change the prefix. Each code will
have to be preceded by a prefix:
normal – for everyday use. By default, it consists of a suitable number of digits 0 (e.g. if
the determined prefix length is 4, the default prefix is 0000);
DURESS – for use, when the user has been forced to enter the code. Using the code will
trigger a silent alarm. By default, it consists of a suitable number of digits 4 (e.g. if the
determined prefix length is 3, the default prefix is 444).
Users – the following functions are available in the submenu:
New user – allows to create a new user (see: section ADDING NEW USER p. 27).
Edit user – allows to edit the existing users (see: section EDIT USER p. 27).
Zobrazit stránku 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Komentáře k této Příručce

Žádné komentáře