Satel INTEGRA Plus Uživatelský manuál stáhnout pdf (Strana 34)

32 User Manual SATEL

7. Press the

key

. The last one of the selected events which occurred in the system will be

displayed.

8. Using the  key, scroll through the list of previous events.

In addition to defining the event types to be displayed, the SELECT PART. function can

also be used to indicate the partitions to which the events are to refer.

If the GRADE 3 option is enabled in the system, the installer or administrator can use

the VIEW GRADE3 function instead of the VIEW function. In such a case, the events

selected among those required by the EN 50131 standard for Grade 3 will be

displayed.

5.11.4 Way of presenting events

The following information is shown in the display upper line:

– date and time of event occurrence;

– additional information on the events in shortened form, e.g. number of partition, zone,

user, timer, expander, keypad, etc.

Event description is displayed in the lower line.

If no key is pressed for a few seconds, additional information on the event will be displayed,

e.g. name of partition, zone, user, timer, expander, keypad, etc.. After a few seconds, the

event description will be displayed again, and so on.

Pressing the  key enables the manual toggling between description of the event and

additional information on the event.

Pressing the  key when the event description is displayed will allow you to see further

additional information on the event, shown in a shortened form.

Using the  or  key will block the automatic toggling between description of the event and

additional information on the event.

After the list of events has been scrolled through with the use of the  or  key, the

automatic toggling between description of the event and additional information on the event

will be restored.

5.12 Programming the partition timer

The partition timer automatically arms / disarms the partition.

1. Enter the code and confirm with the

key

2. Using the  key, scroll through the menu until you find the CHANGE OPTIONS submenu.

3. Press the

key

4. Using the  key, scroll through the menu until you find the PART. TIMERS function.

5. Press the

key

. The list of partitions will be displayed.

6. Using the  and  keys, find in the list the partition for which the timer is to be

programmed.

7. Press the

key

8. When the ACTIVE option is displayed, make sure it is enabled (the

symbol is displayed

next to the option). If it is not enabled (the

symbol is displayed next to the option), press

any digit key.

9. Using the  key, scroll through the menu until you find the TYPE function.

10. Press the

key

11. Using the  and  keys, select the timer type:

everyday – if the partition is to be armed / disarmed at the same time every day;

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Komentáře k této Příručce

Žádné komentáře

Satel INTEGRA Plus Uživatelský manuál Strana 34

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Satel INTEGRA Plus