Satel INTEGRA Plus Uživatelský manuál stáhnout pdf (Strana 24)

22 User Manual SATEL

The installer can configure the alarm system so that the arming functions will not be

available after tamper. A message on the display will indicate that the user must call

for service. The arming functions will not be available until the service code is entered

and confirmed with the key.

5.4.1 Full arming without partition selection

The arming without partition selection is possible when none of the partitions to which the

user has access is armed and the keypad is not signaling any alarm.

1. Enter the code and confirm with the

key

2. When the ARM ALL function is displayed, press the

key. The arming procedure will be

initiated in all partitions which are accessible to the user and are operated by the keypad.

If the user can only arm one partition, the arming procedure will be initiated as soon as

the code is entered and confirmed with the key.

5.4.2 Full arming the selected partitions

1. Enter the code and confirm with the

key.

2. Using the  key, scroll through the menu until you find the ARM function.

3. Press the

key. A list of partitions which can be armed will be displayed.

4. Using the  and  keys, find in the list the partition which is to be armed.

5. Press any digit key. The symbol in the upper right-hand corner will be replaced by the

symbol (see also section SELECTION FROM THE MULTIPLE-CHOICE LIST p. 15).

6. Repeat the steps 4 and 5 for the next partitions which are to be armed.

7. Having selected the partitions which are to be armed, press the

key.

You can also arm the selected partitions using of the ARM SELECTED function, available upon

entering the code and confirming with the

key, but only when none of the partitions

accessible to you is armed and the keypad is signaling no alarm.

5.4.3 Arming in the selected mode

1. Enter the code and confirm with the

key.

2. Using the  key, scroll through the menu until the ARMING MODE function is found.

3. Press the

key. A list of arming modes will be displayed (see: description of the ARMING

MODE

function, p. 17).

4. Using the  and  keys, find the arming mode which is to be activated, and then press

the

key.

5. When the ARM function is displayed, press the

key. Proceed in the same way, as for

the full arming of selected partitions (steps 4-7).

5.4.4 Quick arming

The installer can permit the arming without user authorization. The partitions indicated by the

installer will be armed.

1. Select the arming mode (press one of the keys: 0 – full arming; 1 – full arming +

bypasses; 2 – arming without interior; 3 – arming without interior and without entry delay).

2. Press the

key. The arming procedure will begin.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Komentáře k této Příručce

Žádné komentáře

Satel INTEGRA Plus Uživatelský manuál Strana 24

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Satel INTEGRA Plus