Satel INTEGRA Plus Uživatelský manuál stáhnout pdf (Strana 33)

SATEL INTEGRA Plus 31

4. Press any digit key until the symbol appears in the upper right-hand corner of the

display.

5. Repeat the steps 3 and 4 for the next zones which are to be isolated.

6. Press the

key

. A message will inform you that the zones are isolated.

Having started the ISOLATE function (step 2), you can press the  or  key to switch

over the keypad to the graphic programming mode (see: section SELECTION FROM THE

MULTIPLE-CHOICE LIST p. 15).

5.10.3 Unbypassing

The zones can be unbypassed by the users having the ZONES BYPASSING right. Proceed in

the same way as when inhibiting or isolating the zones (steps 1-3), but the symbol must be

shown in the upper right-hand corner of the display, if the zone is to be unbypassed upon

pressing the

key.

5.11 Viewing the event log

The events viewing function, when started by the administrator or the ordinary user,

provides no information about:

 panic alarms;

 alarms triggered using the DURESS type code.

5.11.1 Viewing all events

1. Enter the code and confirm with the

key

2. Press in turn the 5 and 2 keys. The last event which occurred in the system will be

displayed.

3. Using the  key, scroll through the list of previous events.

5.11.2 Viewing the events required for Grade 3

If the GRADE 3 option is enabled in the system, the function allowing the installer and

administrators to view events required by EN 50131 for Grade 3 is available.

1. Enter the code and confirm with the

key

2. Press the 5 key. Functions available in the EVENTS submenu will be displayed.

3. Using the  key, scroll the menu until the G

RADE3 function is found.

4. Press the

key

. The last Grade 3 required event which occurred in the system will be

displayed.

5. Using the  key, scroll through the list of previous events.

5.11.3 Viewing the selected events

1. Enter the code and confirm with the

key

2. Press in turn the 5 and 1 keys.

3. When the SELECT EVENTS function is displayed, press the

key. The list of event types

will be displayed.

4. Select which event types are to be displayed (see: section SELECTION FROM THE MULTIPLE-

CHOICE LIST p. 15).

5. Press the

key

. This will bring you back to the S

ELECTED submenu.

6. Using the  key, scroll down the menu until you find the V

IEW function.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Komentáře k této Příručce

Žádné komentáře

Satel INTEGRA Plus Uživatelský manuál Strana 33

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Satel INTEGRA Plus