Satel CA-10 Instalační manuál stáhnout pdf (Strana 17)

Satel CA10 plus - LCD keypad Programming and Installation Manual

- 15 -

The following priority levels are assigned by default (starting with the highest):

1. entry delay,

2. fire alarm,

3. burglary alarm,

4. armed (or silent armed)

5. fire alarm occurred,

6. burglary alarm occurred,

7. exit delay.

Reset Defaults

The function restores default parameters of keypad.

Test

The function enables keypad functioning correctness to be tested. Starting this function

restores default keypad parameters. To preserve your own parameters it is necessary

to write them into computer before testing, and after testing they should be again

programmed from the computer. Pressing key [

] after end of testing will restart keypad.

Computer supported programming

All keypad parameters (v3.00) can be programmed from the computer by means of the

DLOAD10

program working in the WINDOWS environment (version 1.00.03 and later).

The program serves also the previous versions of LCD keypads. Use the cable for

panel programming to connect the keypad to the computer RS-232 port. No

initialization is required - the keypad will automatically respond to DLOAD10

commands.

1 2 ... 12 13 14 15 16 17 18 19

Žádné komentáře

Satel CA-10 Instalační manuál Strana 17