6 INT-KSG SATEL
there is a trouble in the system (including tamper);
there was a verified alarm.
The keypad will inform you about the refusal to arm by means of a message specifying the
cause for refusal.
If after a verified alarm the arming is impossible, the installer must be called. The
arming will only be possible after the installer intervention.
Bypassing violated zones when arming
If the arming procedure could not be started, and a message on the display informs you that
there are violated zones, you can review the list of such zones upon pressing the 2 key. To
scroll through the list, use the and keys. Pressing the 4 key will allow you to bypass
the given zone. A message on the display will prompt you to press the 1 key to confirm that
the zone is to be bypassed.
Forced arming
If the arming procedure could not be started, the displayed message can allow of the forced
arming (1=Arm). On pressing the 1 key, the system will be armed despite a violated zone or a
trouble.
2.6 Failure of arming procedure
If the installer can program the control panel so that the arming procedure may end in failure.
The system will not be armed, if at the end of the exit delay countdown:
there is a violated zone in partition which was not violated when the arming procedure
was started;
there is a trouble which did not exist when the arming procedure was started.
2.7 Exit delay termination
If your installer has enabled this feature, the partition exit delay can be terminated by
touching in turn the 9 and keys (or 9 and ).
3. Disarming and alarm clearing
Enter the code and confirm using or . If there is an alarm
in the system, it will be cleared. If only one of the keypad
operated partitions is armed, it will be disarmed. If some
partitions are armed, a menu will be displayed with two
functions available: D
ISARM ALL
and D
ISARM SELECTED
. By
selecting a function the user decides whether all the partitions
available to him/her will be disarmed, or only the selected ones
(the partitions are selected in the same way, as when arming
the selected partitions).
3.1 Alarm clearing without disarming
1. Enter the code and confirm using .
2. Using the key, scroll through the menu until the C
LEAR
ALARM
function is found. Having selected the function, touch
the or key to start it.
(13 stránky)
(16 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce